腾讯分分彩龙虎和哪个平台比较靠谱

Latest Announcement:

categories of news

Product Categories

contact us

Anshan Sanyuan Hydraulic Pneumatic Fluid Equipment Co., Ltd.

Address: 30 Sida Road, Anshan Economic Development Zone, Liaoning Province

Website: sd-rising.com

Email: sanyyyjx@163.com

Post code: 114018

Phone: 0412-7357963

Contact: Mr. Wang

Mobile phone: 15604127749

Contact: Ms. Wang

Mobile phone: 18941298477


company news

Your current location : Home >> News >> Company News
  • Principle of fluid flow continuity

    Isobaric characteristics of hydropneumatic maintenance: Pascal's law "equilibrium fluid pressure at a certain point in a liquid is transmitted to all parts of the liquid equally" Equal volume characteristics: Assume that the volume of liquid given out by hydraulic cylinder 1 is equal to the volume absorbed by hydraulic cylinder 2. Hydraulic transmission can transmit force: the ratio of force is equal to the ratio of the area of the two pistons Hydraulic transmission can transmit the speed: The speed ratio is equal to the inverse ratio of the area of the two pistons v2 / v1
    Release time: 2018-04-25 Click times: 226

  • Pull-off valve has a predetermined disconnect mechanism

    The pull-off valve is specially used for CNG car refueling, and can be used with any CGV1 standard refueling equipment. If the car suddenly starts unexpectedly during the filling process of the dispenser, the pull-off valve (400 ~ 600N safety pull-off) on the filling hose can be automatically separated and cut off the air supply at both ends to prevent the danger caused by misoperation. The main purpose of natural gas cut-off valve:
    Release time: 2017-12-05 Click times: 193

  • Development of hydraulic couplings to high speed, high power and integration

    Hydraulic components will develop in the direction of high performance, high quality, high reliability, and complete systems; develop in the direction of low energy consumption, low noise, vibration, no leakage, pollution control, and application of water-based media to meet environmental protection requirements; develop high integration and high Power density, intelligence, mechatronics, and small and miniature hydraulic components; actively adopt new processes, new materials and electronics, sensors, etc.
    Release time: 2017-10-24 Click times: 162

  • The pressure of the suction chamber of the hydraulic mechanism depends on the suction height and the resistance of the suction line

    The performance of hydraulic and pneumatic components directly reflects the level of industry and automation. Hydraulic and pneumatic components are wearing parts, and their service life directly affects the advanced, stable and long-term nature of automation and industrial machinery. These are directly related to its processing accuracy, structural rationality, material properties, and processing methods. Sealing principle: hydraulic and pneumatic seal
    Release time: 2017-10-10 Click times: 219

  • Pull-off valve is designed to be installed on the loading and unloading hose of chemical raw materials

    The main purpose of natural gas cut-off valve: The cut-off valve is designed to be installed on the loading and unloading hose of chemical raw materials (such as liquid propane, ammonia, ethylene oxide, liquefied petroleum gas, butadiene, industrial methanol, natural gas). When pulling force, the pull-off valve will be automatically opened to prevent leakage caused by the unloading of the loading and unloading tank truck and prevent accidents and cause personnel and equipment.
    Release time: 2017-09-19 Click times: 260

  • Hydraulic and pneumatic maintenance with oil as working medium

    What is a hydraulic system? What is a pneumatic system? How to operate the hydraulic and pneumatic maintenance A: 1. Use oil as the working medium, use the pressure energy of the oil and control the complete set of hydraulic actuators through control valves and other accessories. 2. Use compressed air as the working medium to transmit power and control signals, and control and drive various machinery and equipment to achieve the production process.
    Release time: 2017-09-05 Clicks: 160

  • Preparations for troubleshooting of hydro-pneumatic fluid equipment

    What are the preparations before the troubleshooting of the hydraulic system of the hydraulic and pneumatic fluid equipment? Before troubleshooting, you must first carefully check the equipment instruction manual and the relevant files of the equipment. The following situations should be grasped through reading and preliminary inquiry. ① The structure, working principle, technical performance and characteristics of the equipment. ② The structure and working principle of various components used in the hydraulic system
    Release time: 2017-08-22 Clicks: 107

  • Natural gas cut-off valve to avoid breaking the connecting pipe and causing a large amount of leakage of raw materials

    Natural gas pull-off valve hose type anti-pull emergency pull-off break valve LNG, tank trucks (trains, cars) loading or unloading hoses or equipment, due to operating errors or rolling reasons,
    Release time: 2017-08-09 Clicks: 180

  • Hydro-pneumatic maintenance guarantees good working fluid quality

    Hydraulic and pneumatic maintenance and hydraulic system maintenance are a series of measures to prevent machine failure and premature failure, and to ensure the reliable operation of the machine. With the development of industrial technology, the economic benefits of maintenance are increasingly valued by people. The main purpose of maintenance work is to ensure the good quality of the working fluid. Good working fluid quality
    Release time: 2017-07-26 Clicks: 91

A total of 83 9 Articles per page Pages: 1/10
2 3 4 5 6 7 8 9 10 下一页 1 2 3 4 5 6 7 8 9 10 Next
online service
Welcome to leave us a message
Please enter your message here and we will contact you as soon as possible.
Name
Contact person
phone
Landline / mobile number
大发快三平台 澳洲幸运10手机怎么玩网页游戏 fg捕鸟达人 谁有赛车信誉群 极速赛车高赔率扫码群 pc蛋蛋微信大群 时时彩高反水qq群 pc加拿大网投 欢迎访问 不黑人北京赛车计划群